|
|
|
|
|
| |
 |
| Strainsoft V1.0 |
Strainsoft V1.0is a user-friendly and Windows-based software package for Strain Measurement and stress analysis .It Possess a Very easy and fast Test configuration utility Setup for all the existing types of Sensors. By means of Input Configuration parameters provided for any type of sensor, Strain soft provides the test data results in engineering Units. Offset Nulling and Shunt Calibration options can be performed for the test based on user selection. Measurements can be obtained with delta, rectangular, and tee rosettes can be reduced to principal strains and stresses. The data reduction can be performed in "real-time" or in the post-processing utility. The software package includes for Configuration, Measurement, Data reduction and Post–Analysis.
Strain soft also automatically corrects for Wheat stone bridge non -linearity, transverse sensitivity. Strain soft provides a flexible software platform for capturing, displaying and analyzing your measurement data. |
| Configuration set-up |
 |
| Key Features included: - |
- Accepts all types of Sensor inputs and provides a unique Sensor ;Specific Hardware wizard.
- It provides highly accurate and stable and noise reduced signal conditioning inputs
- Built-in bridge completion circuitry is provided for 120 & 350 ohm strain Gauges
- Menu driven software with wizard based set-up for configuration of the sensor parameters
- The system’s channel count can be increased by addition of corresponding sensor modules and software handles the utility Module check.
- Database driven Management of Configuration data
- Performs offset Nulling and Shunt Calibration on selected Channels (If Required)
- Allows for all available Rosette Setup’s
- Supported rosette types include single, biaxial (Tee), and tri-axial (Rectangular & Delta)
- Allows definition of SG Rosette Parameters (Gauge Factor, Temperature Coefficient, etc) used for Real-time Stress Calculation
- Saving and retrieving Setup’s if its Reused.
- All allowable corrections can be performed on Strain Gauge Channels being used.
- User-Defined Displays (graphical, Slider) with Zooming and Cursor options
- Flexible Logging & Data Export Scheme
|
| Graphical Display of Frequency analysis for Strain |
 |
|
- Real-Time Calculated Channels to Perform Online Mathematical Calculations
- Arithmetical Functions
- Logarithmic & Trigonometric Functions
- FFT Spectrum
- Data Generation
- SG Rosette Calculation
|
- Strain Gauge Rosette Calculation and Post –Processing Mathematics
- Curve Fitting
- Peak Analysis
- Experimental Stress Analysis
- Statistical functions Signal Analysis
|
|
|
| |
| |
|
|
|
|
|
|
